







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Burbank, CA: What They Cost and How the Work Runs
A paver driveway in Burbank typically runs $7,000 to $18,000, and most residential jobs take three to five working days from demo to the last joint-sand pass. The work means tearing out the old slab or asphalt, rebuilding the base, setting a border course, and laying interlocking pavers over a compacted gravel bed. Call (844) 797-7958 to set up a free on-site estimate and we’ll measure the actual driveway and grade before we quote a number.
How the Job Actually Runs, Day by Day

Five stages, in order. Here’s what happens and what you’ll be deciding along the way.
Stage 1: Layout and demo (half a day to a full day)
We mark the finished edges and the grade, confirm where the driveway meets the apron at the street, and check the drainage fall away from the house. Then we break out the existing surface and haul it off. On older Burbank properties this is where surprises show up: a buried brick walk, an old oil-stained base, or a utility line running shallower than expected. You’ll decide the final width and whether we widen the apron while the equipment is already there.
Stage 2: Grading and base prep (one to two days)
We excavate to depth (usually 8 to 12 inches of base under a driveway, more if the soil won’t hold), shape the slope, and compact the subgrade in lifts. This stage decides whether the driveway looks flat for twenty years or settles within three. You’ll lock in the drainage direction and whether a channel drain goes in at the garage threshold.
Stage 3: Base, geotextile and edge restraint (a day)
A woven fabric goes down over the subgrade, then crushed aggregate goes in and gets compacted in 2-inch lifts with a plate compactor and vibratory roller. The border course gets mortared or pinned, and edge restraint is set. The restraint is what stops pavers from spreading at the apron and along the curb line, and it’s the piece installers skip when they’re rushing.
Stage 4: Screeding and laying (one to two days)
A screed rail sets a consistent sand bed, then pavers go down from the border in. On a two-car Burbank driveway that’s roughly 1,800 to 2,500 pavers. You’ll decide the running-bond pattern and the border color before this stage starts, not during it.
Stage 5: Cutting, compaction and joint sand (a day, plus cure)
We cut the field pavers to the hard edges, run the plate compactor over the field to seat everything, sweep polymeric or kiln-dried sand into the joints, and re-compact. We protect the surface from traffic for a minimum of 24 hours. Drive on it after that and you’re finished.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Paver Options You’ll Choose Between
This is where most of the money lives, and the honest differences matter more than the brochure colors.
- Concrete interlocking pavers (the default): Standard 60mm thickness for driveways, 80mm for jobs with heavier vehicles or tight subgrade. Colors and textures run from charcoal and sandstone to a clay-red nearest the older Spanish Revival bungalows. The trade-off is a slightly higher material cost than stamped concrete but much easier spot repair.
- Clay brick pavers: Warm, real, and a natural match for the 1920s to 1940s Magnolia Park and Rancho Equestrian homes this neighborhood has in abundance. They cost more upfront and need consistent sanding of joints, but they age into the look instead of out of it.
- Permeable open-graded pavers: Worth pricing if the driveway drains toward a slope or the garage threshold floods. The premium usually lands in the base build, not the stone, so budget the higher end of the range.
- Borders and patterns: A contrasting border course, herringbone field, or running bond changes the labor more than the material. A simple running bond with a matching border is the value pick.
- Finish details: Sealing adds $250 to $700 and is optional for a paver driveway, though it helps with the Santa Ana dust and high summer heat that fades unprotected color. A channel drain or trench drain at the garage door is a job-by-job line item.
We work in trusted brand lines like Belgard for pavers and are happy to price a KraftMaid-grade finish upgrade if the driveway ties into a larger front-yard project.
What Paver Driveways Cost in Burbank, CA

The number for your driveway sits between $7,000 and $18,000 for a standard two-car residential job. Here’s what pushes it toward one edge or the other.
- Square footage: Driveways here run from a tight single-car 400 square feet up to a long 900-plus square foot hillside run. Every extra 100 square feet is roughly $1,200 to $2,000 of paver and labor.
- Existing surface and removal: A clean asphalt driveway tears out easily. A reinforced concrete slab with buried footings, old brick edging, or unexpected footings costs more in demo hours and haul-off.
- Subgrade and grade: Flatland Burbank is straightforward. The Verdugo foothills and hillside streets above the valley floor need more base depth, drainage work, or a retaining edge, and that lands near the top of the range.
- Material grade: Clay brick and permeable systems cost more than standard concrete pavers. Borders and herringbone carry a labor premium over running bond.
- Permit scope and street apron work: Rebuilding the apron where the driveway meets the public right-of-way adds inspection time and cost.
A written estimate includes demo, haul-off, base, geotextile, edge restraint, pavers, joint sand, compaction and cleanup – that’s the whole job. What it usually doesn’t include is optional sealing, a drain system, or repairs to the garage threshold if the existing one is failing. Every line item shows up in the quote, and the number on paper is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Burbank Homes Specifically Do to This Job
Burbank is a company town built on a soundstage economy, and that shows up in the driveways we’re called to. The 1920s to 1940s Spanish Revival and Craftsman bungalows in Magnolia Park and the Rancho Equestrian district often sit on narrow lots with original brick or unreinforced driveways that have taken decades of heat and root heave. Homeowners working in entertainment expect a fast, permit-ready install around a shoot schedule, which is where the three-to-five-day plan matters. The Verdugo foothills and hillside streets above the valley floor carry some of the tightest fire-clearance and grading scrutiny in the region, so a paver driveway there means more base depth and drainage planning. And the flatland bungalows regularly hide unpermitted additions and converted garages that surface the moment a permit pulls, which is why we check before we demo, not after. We’re based in and cover Burbank and the surrounding foothill communities.
Serving Burbank, CA – Our Local Coverage Area
We serve Burbank and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Burbank

Most residential paver driveways in Burbank take three to five working days, including demo, base, and finish. A larger hillside job or one with extra drainage work can run a day or two longer. Call (844) 797-7958 for a schedule against your specific driveway.
Many paver driveway installations require a permit when the work touches the public apron, changes the grade, or affects drainage, and we handle that filing and inspection for you. The city’s aggressive building-safety enforcement means doing it right the first time beats a rework later. Call (844) 797-7958 to talk through your project.
Overlaying pavers on an existing concrete slab is possible only if the slab is structurally sound and has proper fall, which most old Burbank driveways don’t. A full removal and rebuild is the safer bet for long life. Call (844) 797-7958 for an on-site look at yours.
With our upfront pricing, the number in the written quote is the number you pay – change orders only happen if you add scope. Hidden footings or utility surprises get flagged before we touch them, not discovered halfway through. Call (844) 797-7958 for a printed line-item estimate.
Every Groundwork paver driveway in Burbank is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction. Call (844) 797-7958 to go over the terms on the phone.
Get a Free Paver Driveway Estimate in Burbank
Call (844) 797-7958 and a live person answers, day or night, to set up a free on-site estimate for paver driveways in Burbank. We measure the driveway, walk the grade and drainage, and hand you a printed line-item quote with materials, labor, and the 730-Day Done Right Promise spelled out. There’s $1,000 off projects over $10,000 and 0% financing for 18 months if you need it.
Written by the team at Groundwork Construction Co.












