







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Glendale, CA: What the Job Actually Involves
Paver driveways in Glendale, CA typically run $7,000 to $18,000 installed, and most take five to nine working days from demo to the final joint sand. The work is excavation, a compacted base, edge restraint, then pavers laid to a slope that sheds water away from your garage and foundation. One wrinkle up front: on tight lots and hillside streets here, staging and access drive the schedule more than the paving does. Call (844) 797-7958 for a free, written estimate before anything gets dug.
How We Build a Paver Driveway, Stage by Stage

We don’t hand you a vague start date and disappear. Here’s the actual sequence, with who decides what and when.
Day 1: Layout and demo. We mark out the drive, confirm grades against the garage sill and any drainage swales, then pull out the old surface. If it’s concrete, that means breaking and hauling; if it’s failing asphalt, it comes up faster. You decide at this stage whether you’re keeping the existing footprint or widening, because widening may add a curb cut and trigger a permit conversation.
Days 1-3: Excavation and base. This is the part nobody sees and every driveway depends on. We excavate to depth, haul off spoil, and bring in base aggregate in lifts, compacting each one. On Glendale’s sloped lots, base depth and compaction are non-negotiable; a shallow base on a slope fails inside two or three winters. You don’t decide much here, but you should see this stage happen rather than hear about it later.
Days 3-4: Edge restraint and screeding. We set a rigid edge restraint on the open sides so the field doesn’t creep, then screed the bedding layer to a consistent grade. Slope away from the house matters more than people realize in hillside Glendale; ponding near a garage door will find its way inside.
Days 4-7: Laying pavers. Field pavers go down, cuts get made at the edges and around any utilities, and the pattern you chose gets locked in. This is the visual payoff stage, and it’s also where a good setter versus a rushed one shows years later.
Days 7-9: Sand, compaction, cleanup. Sweep polymeric sand into the joints, compact, top off, and clean the site. We walk it with you and hand over care instructions. Then the driveway gets driven on.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Most of the decisions happen before we break ground, in the estimate meeting. Here’s what’s on the table and the honest trade-off of each.
- Concrete pavers (the default choice). Interlocking units in a range of sizes and colors, widely available including from Belgard. Durable, repairable one paver at a time, and the highest labor material but the longest service life. Best for most Glendale homes.
- Clay brick pavers. Warmer tone, classic look on Spanish Colonial and Craftsman homes. Heavier, pricier, and a smaller color palette. It suits a period home; it can look busy on a 1950s ranch.
- Permeable pavers with open joints and a gravel reservoir. Worth raising on hillside lots where runoff is a real problem. Costs more in base prep, relieves drainage headaches. This is where our Glendale slope conditions come into play.
- Laying pattern. Herringbone or running bond for the field; a soldier course border for a finished edge. Pattern affects cut count and labor more than material cost.
- Color and grade. Standard tumbled vs. straight-edge, single color vs. blended. Grade matters on durability; skip the cheapest tier on a driveway that sees two cars daily.
What Paver Driveways Cost in Glendale, CA

A standard paver driveway in Glendale runs $7,000 to $18,000, and that spread comes down to a handful of variables. Here’s how the number moves.
- Square footage. A single-car drive sits near the low end; a long hillside approach lands at the top.
- Base and demo condition. Removable asphalt is cheaper than breaking and hauling concrete; a failing subgrade that needs over-excavation adds cost.
- Slope and drainage. Glendale’s hillside lots often need extra base, a retaining curb, or a drainage reservoir. That’s real money.
- Paver grade and pattern. Premium units and complex patterns raise material and cut labor.
- Access. Tight streets and alley-loads mean smaller equipment and more hand-carry, which adds time.
Our written estimate is line-item: demo, base, restraint, pavers, sand, cleanup. What’s typically not in a base estimate is unforeseen subgrade repair once we open the ground, or a curb cut if the job needs one. We flag both before they happen, not after.
See the difference
Before
After
Before
After
Before
AfterWhat Glendale Homes Specifically Do to This Job
The local terrain changes the work in ways that a flat-lot quote won’t capture. A lot of Glendale’s inventory dates to the 1920s-40s (Spanish Colonial and Craftsman near downtown) or the 1950s-60s ranch-era, and both vintages come with old driveways, dated drainage, and grading that was never designed for a modern vehicle load. On the hillside streets off Glenoaks and in Chevy Chase Canyon, a grading change can trigger review requirements that don’t apply on a flat lot, so we plan the slope carefully before the first shovel. Glendale’s hot, dry summers also dry out subgrade and widen joints if the base isn’t right. We work across the city, including in the 91205, 91204, and 91208 ZIP codes, and we know the alley-load and narrow-access reality of the denser blocks. If the driveway is part of a larger Driveway & Pavers in Glendale project that also touches walkways, we scope it together so the grades and materials match.
Serving Glendale, CA – Our Local Coverage Area
We serve Glendale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Glendale

Most paver driveways in Glendale take five to nine working days, with slope, base prep, and access driving the spread. A flat, straightforward lot lands near five days; a hillside job with deep base work runs to the top of that range. Call (844) 797-7958 for a schedule estimate tied to your actual site.
Resurfacing in place usually doesn’t, but widening, changing the grade against the street, or cutting a curb often does. Because Glendale’s hillside and seismic rules are strict, we check the scope against the city before we start and pull what’s required. Call (844) 797-7958 and we’ll tell you what your job needs.
Not for the scope in your written estimate, which is line-item and fixed. The one exception is genuine subgrade repair discovered after demo, which we never hide behind. We flag it and get your approval before doing it. Call (844) 797-7958 for a no-surprise quote.
Paver driveways in Glendale run $7,000 to $18,000 installed, and the low versus high end is mostly square footage, base condition, and slope. A written estimate pins your number down in one visit. Call (844) 797-7958; estimates and design consults are free.
Every job is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right, backed in writing. That’s one of the longest workmanship guarantees in residential construction. Call (844) 797-7958 to get your project scheduled.
Ready to Price Your Paver Driveway in Glendale?
We come out, look at your existing drive, talk through slope and access and material, and leave you a written line-item estimate at no cost. Whether it’s a flat-lot drive in 91205 or a hillside approach in 91208, the process starts the same way. Call (844) 797-7958 to book your free on-site estimate for paver driveways in Glendale. Live person on the phone, around the clock. No project over $10,000 goes without our $1,000-off standing offer, and 0% financing for 18 months is available.
Written by the team at Groundwork Construction Co.












