







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Glendale, CA: What the Job Actually Involves
Door installation in Glendale, CA typically runs from $1,200 to $8,500 per opening, with exterior entries and custom carriage-house doors landing at the top of that range and interior slabs near the bottom. Most single-door installs take one to two days; a full house package of six to eight doors runs three to five working days. The number moves on frame condition, material grade, and whether the wall has to be opened. Call (844) 797-7958 and we’ll walk your actual openings before quoting a dollar.
How We Run a Door Installation, Stage by Stage
Every job follows the same sequence, whether it’s one front entry in a Spanish Colonial off Brand or eight interior doors through a 1960s ranch in the Verdugo foothills.
- Stage 1: Measure and assess (day 1, 1-2 hours). We pull exact rough-opening dimensions, check the frame for plumb and square, and note anything hidden – rotted sill plates, out-of-level headers, plaster that won’t survive demo. You get the finding in writing before we order.
- Stage 2: Order and lead time (1-3 weeks, varies by door). Stock slabs are days; custom carriage-house, arched, or wood doors run 3-6 weeks. You make your material and finish decisions here, and this is where the schedule locks.
- Stage 3: Demo and prep (half a day per opening). Old door and trim come out, the rough opening is cleaned up, and any rot or settling in the frame gets corrected before the new unit goes near it. Skipping this is how doors end up sticking two summers later.
- Stage 4: Set, shim, and seal (2-4 hours per door). New door gets shimmed, fastened, insulated, and weather-sealed. Hinges and hardware go on, then the door gets cycled dozens of times to check swing and latch before we call it done.
- Stage 5: Finish and walkthrough (1 day, or longer for stained wood). Casing and trim, paint or stain touch-up, and a final pass with you on every door. On exterior entries, Glendale inspections happen before we close out the permit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most Glendale homeowners spend the first ten minutes of the consult deciding between three or four real categories. Here’s what actually separates them.
- Fiberglass exterior doors – the workhorse. Holds up in Glendale’s dry heat and Santa Ana wind cycles, doesn’t warp like wood, and takes a wood-grain finish that reads convincingly up close. Mid-price.
- Solid wood and carriage-house doors – the finish-grade choice for Spanish Colonial and Craftsman entries near downtown. Beautiful on a 1920s bungalow, but it needs re-sealing every few years in our climate, and it’s the most expensive category.
- Steel entry doors – the most secure and the most affordable, but dents and rusts if the finish chips. Fine for a side entry or garage access door.
- Interior slab vs. pre-hung – a slab replaces just the door and reuses the existing frame (cheaper, faster, only works if the frame is solid). Pre-hung replaces frame and door together, which is what we recommend on any home past 40 years old.
- Hardware and finish – builder-grade vs. solid brass or bronze, keyed-alike sets, and multi-point locking. Whisper-close and soft-latch hardware is worth the upgrade on interior doors if you have kids or a home office.
What Door Installation Costs in Glendale, CA

Our Glendale door installation pricing falls in these bands:
- Interior pre-hung door, standard: $1,200 – $2,400 installed
- Interior door, hollow-core slab replacement: $600 – $1,200
- Exterior entry door, fiberglass or steel: $2,200 – $4,800
- Custom wood or carriage-house entry: $4,500 – $8,500
- Sliding or French door unit: $2,800 – $6,200
What pushes a job toward the high end? Four things. Wall condition – an out-of-square rough opening or rotted framing adds carpentry hours. Material grade – the door itself can be 60% of the total on custom wood. Structural or trim changes – widening an opening or adding a transom means framing and drywall. Permit scope – exterior door replacements in Glendale generally pull a permit; interior swaps usually don’t.
Every written estimate covers the door, hardware, trim, weather-sealing, and site cleanup. It does not cover painting beyond touch-up, new flooring transition strips, or structural repair discovered after demo – we flag those in writing before we proceed, never after.
See the difference
Before
After
Before
After
Before
AfterWhat Glendale Homes Specifically Do to This Job
Glendale’s housing stock splits into three groups and each one fights door installation differently. The 1920s-40s Spanish Colonial and Craftsman bungalows near downtown have plaster walls and hand-framed openings that are rarely square – we plan for shimming and trim work on nearly every one. The 1950s-60s ranch tract homes up in the Verdugo foothills and out toward Chevy Chase Canyon have settled headers and sagging jambs from decades of soil movement, which means a pre-hung unit is almost always the better call than a slab swap. And the contemporary hillside builds on the steep streets off Glenoaks have wide openings and premium doors that demand exact hardware matching.
Glendale’s hot, dry summers and Santa Ana wind events are hard on exterior doors. Wood dries, cracks, and needs re-sealing twice as often as a coastal climate would demand. That’s why we steer most foothill homeowners toward fiberglass entries. Exterior door replacements trigger a permit and inspection here, and we pull it as part of the job.
Serving Glendale, CA – Our Local Coverage Area
We serve Glendale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Door Installation in Glendale

Most single-door installs finish in one to two working days, with custom-ordered doors adding three to six weeks of lead time before we start. A whole-house package of six to eight doors runs three to five days on site.
Exterior door replacements generally require a permit in Glendale; interior door swaps usually do not. We confirm the requirement against your specific scope and pull the permit as part of the estimate.
Yes – a same-size replacement doesn’t touch structure or plumbing, and it’s how most of our Glendale door jobs run. Widening an opening or relocating a light switch is a separate line item, quoted before we start.
Interior pre-hung doors run $1,200-$2,400 installed; exterior entries run $2,200-$8,500 depending on material and custom work. Call (844) 797-7958 for an exact quote on your openings.
All our door installation is backed by the 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction.
If you’re planning a wider project, door installation is often the last piece of a Windows & Doors in Glendale scope, or paired with a Cabinets & Countertops in Glendale job during a kitchen remodel, or a Garage Conversion ADU in Glendale where the new entry doors anchor the unit. Our Windows & Doors team handles all of it, and we cover the full Glendale area from 91209 through 91222.
Ready for a Written Door Installation Quote in Glendale?
Call (844) 797-7958 for a free on-site estimate. We’ll measure every opening, confirm what needs a permit, and hand you a line-item price with no change orders and 0% financing for 18 months available. A live person answers, 24/7.
Written by the team at Groundwork Construction Co.












