







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Glendale: What the Job Actually Costs and How Long It Runs
Cabinets & countertops in Glendale typically run $14,000 – $45,000 for a full cabinet-and-top package, with cabinet installation alone at $4,000 – $13,000 and countertop installation at $2,000 – $6,500. A straight swap of doors and tops takes about a week; a full tear-out with new boxes, plumbing reconnects and a stone template runs three to four weeks. Call (844) 797-7958 for a free on-site estimate, and you’ll get the line-item number in writing before anything is ordered.
How We Run Cabinet and Countertop Work, Stage by Stage

Cabinet and countertop work is a sequence problem. Get the order wrong and you’re paying for a stone slab that doesn’t fit a box that moved. Here’s the order we hold to.
Stage 1: Measure, verify, and lock the layout (2 – 4 hours)
We template the actual room, not the drawing. That means checking out-of-square walls, floor dips, and where the gas shutoff and outlets really sit. This is where you decide box layout, drawer stack heights, and whether the sink stays where it is. Mid-century Glendale homes in the 91205 and 91204 ZIPs often have walls that are an inch off over eight feet, and that decision gets made now, not after the boxes arrive.
Stage 2: Order and lead time (3 – 6 weeks)
Stock cabinets land in about a week. Semi-custom KraftMaid runs three to five weeks. Fully custom boxes push six-plus. Stone slabs get selected at the yard during this window, because the slab you fall in love with today may not be there in a month. You approve the slab layout and edge profile here.
Stage 3: Demo and prep (1 – 2 days)
Old cabinets and tops come out, we inspect what’s behind them, and we correct the surprises: water damage at the sink base, missing blocking, a floor that needs leveling compound. If plumbing or a circuit needs to move, that happens now, before a single box goes up.
Stage 4: Cabinet set and countertop template (2 – 3 days, then a wait)
Boxes get set, leveled, and shimmed, then anchored. Uppers hang after the base run is true. Once cabinets are locked, the stone fabricator comes out to template. Fabrication and install of quartz or granite typically runs 7 – 10 business days after template.
Stage 5: Countertop install, sink and finish (1 – 2 days)
The slab goes in, the undermount sink gets set and sealed, the faucet and disposal connect, and we check every door and drawer for alignment and soft-close function. That final walkthrough is where the 730-Day Done Right Promise gets explained to you in person, not buried in paperwork.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Most of the money and most of the regret live in four decisions. Here’s the honest version of each.
- Stock vs. semi-custom vs. custom boxes. Stock is the cheapest and fastest, but it only fits standard increments, which means filler strips in older Glendale kitchens. Semi-custom lets you adjust depth and height to the room. Custom suits the irregular alcoves in the 1920s – 40s Spanish Colonial homes near downtown, where nothing is standard.
- Plywood vs. particleboard boxes. Plywood holds up better around the sink and dishwasher where moisture sits. Particleboard is common at the lower price tier and fine in dry spots, less fine near water.
- Quartz vs. granite vs. quartzite. Quartz is non-porous, needs no sealing, and takes heat poorly. Granite is natural, takes a hot pan better, and needs resealing roughly once a year. Quartzite is the hardest of the three and the priciest.
- Slab thickness and edge profile. A 3cm slab with a simple eased edge keeps cost down. A mitered or waterfall edge adds labor and price but changes the look entirely.
Therma-Tru door systems come up more than you’d expect in these jobs, since a kitchen that opens to a patio often gets that door replaced in the same pass.
What Cabinets & Countertops Costs in Glendale, CA

The full cabinet-and-top package in Glendale lands between $14,000 and $45,000. Where you fall inside that range comes down to five things.
- Cabinet line count and linear footage. A galley with 12 linear feet costs far less than an L-shape with an island at 30 feet.
- Box grade. Stock to semi-custom is the biggest single swing, often several thousand dollars.
- Stone selection. A mid-tier quartz and a book-matched quartzite are not the same purchase.
- Plumbing and electrical relocation. Moving a sink or adding circuits means a licensed trade and an inspection, and that adds cost.
- Existing condition. Water damage, unlevel floors, or a wall that has to move.
A written estimate from us includes cabinet boxes and doors, countertop fabrication and install, sink and faucet set, disposal reconnect, haul-away, and permit fees where a permit is required. It typically does not include new appliances, flooring, or backsplash tile beyond the small strip against the counter, since those are their own scope.
See the difference
Before
After
Before
After
Before
AfterWhat Glendale Homes Specifically Do to This Job
This city’s housing stock forces decisions other markets don’t. The mix of 1920s – 40s Spanish Colonial and Craftsman bungalows near downtown and the 1950s – 60s ranch homes in the 91208 and 91226 ZIPs means two very different jobs. In the older homes, walls are plaster over lath, corners aren’t square, and cabinet runs have to be scribed to fit. Out in the Verdugo foothills and Chevy Chase Canyon, hillside infill and mid-century construction mean floor framing can be out of level in ways that show up the moment a slab is set on top. The seismic and hillside grading codes that govern so much of Glendale construction also affect any structural change tied to a cabinet job, which is one reason a simple layout change sometimes needs eyes on the framing first. It’s also why homeowners often pair major kitchen work with a Kitchen Remodeling in Glendale scope so the structural questions get answered once. If the project grows into a bigger build, we also handle a Garage Conversion ADU in Glendale or a New Detached ADU in Glendale, and both benefit from the same early layout discipline.
Serving Glendale, CA – Our Local Coverage Area
We serve Glendale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Glendale

Most runs take three to four weeks from demo to final walkthrough, and the bulk of that is lead time, not labor. Stock cabinets compress the schedule; semi-custom adds three to five weeks before demo even starts. Call (844) 797-7958 for a timeline tied to your specific cabinet line.
Straight replacement in the same footprint usually doesn’t require one, but moving plumbing, adding circuits, or altering a wall does. Those pulls go through the city and get inspected. Our written estimate tells you exactly which permits apply and includes the fees. Call (844) 797-7958 to talk through your layout.
Yes, and it’s the most common path we take. Keeping the sink, cooktop and outlets where they are cuts both cost and schedule, and it avoids the inspection cycle entirely. The layout has to work with the existing rough-in, so we measure first and design around it.
A same-footprint job typically runs $14,000 – $30,000, with the low end on stock cabinets and mid-tier quartz. Only jobs that move plumbing, add electrical, or go custom on boxes reach the upper half of the $14,000 – $45,000 range. Call (844) 797-7958 for an exact quote, and estimates are free.
Every cabinet and countertop job we complete is covered by the 730-Day Done Right Promise – if it isn’t done right, we make it right. Product warranties from the cabinet and stone manufacturers ride alongside it. We walk you through both at the final inspection.
Get a Free Cabinet and Countertop Estimate in Glendale
Call (844) 797-7958 and a live person answers, day or night. We’ll set an on-site visit for your Glendale home, measure the actual room, and hand you a written line-item estimate that separates cabinets, fabrication, install and any permits so you can see exactly where the money goes. Every estimate is free, and the number you see is the number you pay. Our kitchen remodeling team covers the Glendale area with technicians bringing up to 12 years of experience.
Written by the team at Groundwork Construction Co.












