







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Burbank, CA: What the Job Really Involves
New cabinets and countertops in Burbank usually run $14,000 – $45,000 as part of a kitchen update, with cabinet installation at $4,000 – $13,000 and countertop installation at $2,000 – $6,500 on their own. A straightforward cabinet-and-counter swap takes about two to three weeks from demo to final caulk; moving a sink, a gas line, or a wall stretches that to five or six. Call (844) 797-7958 for a free on-site estimate, and you’ll get a written line-item quote before anything gets ordered.
How the Cabinet and Countertop Work Actually Runs

This is the part most bids skip, and it’s where schedules fall apart. Here’s the real sequence we run, with the decisions you’ll need to make and roughly when.
Stage 1: Measure and template (days 1 – 3)
We take field measurements of the actual walls, not the plans. In Burbank’s older homes, out-of-square corners and wavy lath-and-plaster walls are the norm, so a laser measure and a level tell us more than any drawing. You’ll confirm cabinet layout, door style, and whether the sink stays put. This is also when we check for anything hiding behind the existing cabinets: old wiring, water damage, or the occasional surprise from an unpermitted past addition.
Stage 2: Demo and rough-in (days 3 – 5)
Old cabinets and counters come out, and the walls get opened where plumbing or electrical needs to move. If everything stays in place, this is a fast, contained day. If you’re relocating the sink or adding a dishwasher circuit, an electrician or plumber comes in here. You’ll decide then whether to add an outlet for a microwave drawer or a dedicated circuit for induction. We cap and label anything that gets abandoned.
Stage 3: Wall prep and cabinet install (days 5 – 9)
We patch, prime, and check for level. Base cabinets go in first and get shimmed, scribed, and anchored to studs. Uppers follow, aligned to the base run. If you’ve chosen KraftMaid or Wellborn cabinetry, the boxes arrive assembled and the install is predictable; flat-pack options take longer and cost less up front. You’ll want to be available mid-stage to confirm hardware placement and drawer pull heights.
Stage 4: Template and fabricate the countertop (days 9 – 14)
Once the base cabinets are set, we template for the counter. Quartz and granite fabricators cut from that template, so the stone doesn’t reach you until the boxes are perfect. Figure 5 – 7 business days for fabrication on standard materials. This is the quiet stretch where the kitchen looks half-finished; it’s normal, and it’s the reason we don’t promise stone on day three.
Stage 5: Set, seal, and finish (days 14 – 17)
Countertops get set and seamed, the sink and faucet get connected, and any backsplash goes up. We caulk, touch up, and walk the job with you. Final inspection happens here if we pulled a permit. You’ll sign off on hardware alignment, door swing, and drawer glide before we close the job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Cabinet and Counter Options You’ll Choose Between
Most of the cost swing on this job comes down to four decisions. Here’s the honest trade-off on each, without the showroom gloss.
- Cabinet construction. Plywood boxes with solid-wood doors hold up for decades; particleboard boxes with thermofoil doors cost 30 – 40% less but can delaminate in a hot, dry valley kitchen. KraftMaid sits in the middle; Wellborn spans the range.
- Refacing vs. replacement. Refacing keeps the original boxes and replaces the doors and drawer fronts. It’s cheaper and faster, but only makes sense when the boxes are solid and the layout works. In Burbank’s 1920s – 40s houses, the original boxes often aren’t worth saving.
- Countertop material. Quartz is the default for a reason: non-porous, consistent, no sealing. Granite needs resealing every year or two and every slab is a one-off. Laminate is the budget play and honestly fine for a rental or a garage-adjacent kitchen.
- Edge and thickness. A standard eased edge is included; a mitered or waterfall edge adds cost and fabrication time. Thicker slabs read as higher-end, and they’re heavier to install.
What Cabinets & Countertops Cost in Burbank, CA

Expect $14,000 – $45,000 for a full cabinet-and-counter replacement as part of a kitchen upgrade. The low end is a like-for-like swap in a modest Magnolia Park bungalow with stock cabinets and quartz. The high end is a larger kitchen, custom cabinetry, stone counters, and relocated plumbing and electrical.
What pushes the number up:
- Kitchen size and cabinet run. Each additional linear foot of base and upper cabinetry adds material and labor.
- Layout changes. Moving the sink, range, or fridge means plumbing, gas, and electrical rough-in, plus drywall repair.
- Existing condition. Water damage, old knob-and-tube wiring, or a wall that has to come out to make the run work all add scope.
- Material grade. Stock vs. semi-custom cabinetry and laminate vs. quartz move the total meaningfully.
- Permit scope. A straight swap is often exempt; structural, plumbing, or electrical changes pull a permit and an inspection.
Our written estimate itemizes cabinets, counters, labor, demo, and disposal, and the number you see is the number you pay. What it doesn’t include: appliances you buy separately, and any structural repair found behind the walls once demo starts. We flag that in writing before proceeding.
See the difference
Before
After
Before
After
Before
AfterWhat Burbank Homes Specifically Do to This Job
Burbank’s housing stock is the wild card. The 1920s – 40s Spanish Revival and Craftsman bungalows in Magnolia Park and the Rancho Equestrian district regularly hide original knob-and-tube wiring and lath-and-plaster walls behind the kitchen cabinets. When we open a wall, we find it. That’s not a scare tactic; it’s a planning fact. The city’s building-safety and seismic retrofit enforcement is stricter than most of the surrounding valley, so any work that touches structure or moves utilities gets reviewed carefully. Older homes near downtown and the post-war flats often carry unpermitted additions or converted garages that surface the moment a permit is pulled. And because so many Burbank residents work in the entertainment industry, timelines matter: a kitchen that’s “mostly done” for a month isn’t acceptable. We build the schedule around that, and we plan counter fabrication to avoid idle weeks. This is part of our broader Kitchen Remodeling in Burbank work, and it pairs well with our Kitchen Remodeling service across the valley. We cover all of Burbank, from Magnolia Park to the hillside streets above the valley floor. Some homeowners pair this with a Garage Conversion ADU in Burbank, and others pair it with a New Detached ADU in Burbank.
Serving Burbank, CA – Our Local Coverage Area
We serve Burbank and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Burbank

Two to three weeks for a straight swap; five to six weeks if plumbing, electrical, or structure moves. The counter fabrication window is the slowest single step. Call (844) 797-7958 and we’ll walk the timeline on your actual kitchen.
Usually not for a like-for-like swap, but yes if you move plumbing, gas, or electrical, or change structure. Burbank’s building-safety enforcement is strict, so we pull permits when the scope requires it and handle the inspection. Call us for a scope review before you order anything.
Yes, and most jobs don’t move it. Keeping the sink and range where they are cuts the cost and schedule significantly. Call (844) 797-7958 for an exact quote on your layout.
$14,000 – $45,000 for a full replacement; $4,000 – $13,000 for cabinets alone and $2,000 – $6,500 for counters alone. Size, material grade, and layout changes drive the range. Call (844) 797-7958 for a free estimate.
Every cabinet and countertop job is backed by our 730-Day Done Right Promise. If something isn’t right, we make it right. That’s in writing, and it applies to labor, not just materials.
Get a Free Estimate on Cabinets & Countertops in Burbank
A free on-site estimate starts with a call to (844) 797-7958. We’ll ask about your kitchen layout, your timeline, and what’s staying versus going. Then we measure, talk through cabinet and counter options, and send a written line-item quote with the price locked in. If it’s not the right fit, we’ll tell you that too. No pressure, no surprise numbers, no voicemail.
Written by the team at Groundwork Construction Co.












