A Groundwork company - serving Burbank, CA
A backyard with a new horizontal privacy fence

Fence Installation Troubleshooting: Common Problems and How to Fix Them

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Burbank

Last updated November 18, 2026

A new front yard fence with a matching gate
A new black aluminum pool fence with a gate
A galley kitchen opened up to the dining room with a new peninsula
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A standing-seam metal roof over a covered porch
A new bay window with a cushioned seat
A new concrete driveway with a paver border
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Fence Installation Troubleshooting: Common Problems and How to Fix Them

A leaning fence post set in pure concrete is actually more likely to fail than one set with gravel drainage. That sounds backwards until you understand what happens underground: concrete traps moisture against the post base, and a post that rots from below grade will out-lean one that drains properly, even if the footing looks solid. Most fence failures in Burbank trace back to two decisions made on installation day – post depth and footing mix – and once you know that, troubleshooting stops being a guessing game. This guide works backward from the symptom to the decision that caused it, so you can tell whether you’re looking at a reset, a replacement, or a systemic problem.

Call (844) 797-7958

Quick Answer

Fix a leaning fence post by first diagnosing the cause: post base rot needs replacement of the post, soil heave needs footing redesign, and poor drainage needs gravel at the base. If the post is solid but the fence sags or racks, you’re likely looking at gate hardware, framing, or rail connections rather than the foundation. In Burbank’s clay-heavy soil and dry summers, we most often see footing failures and dry rot hiding just below grade.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Table of Contents

How Do You Diagnose a Leaning Fence?

Diagnose a leaning fence by identifying which of three failure modes you’re looking at: post base rot, soil heave, or footing failure. Each has a different fix and a dramatically different cost. We’ve pulled enough fences in Burbank to recognize the signs at a glance, and so can you with a few checks.

Start with a physical inspection at the base of each leaning post. Push the post side to side with moderate hand pressure. A post that moves at the soil line but feels solid higher up usually points to footing failure – the concrete has cracked or shifted away from the post. A post that moves high up but feels firm at the soil line points to rot just above grade, where water sits. A post that moves in a consistent direction with the whole fence panel suggests soil heave or a footing that was never deep enough.

Then look at the soil itself. In Burbank, much of the soil is clay-heavy, and it swells when wet and shrinks hard in summer. That movement pushes on footings from the side, which is why a fence that stood straight for eight years can suddenly lean after a wet winter. Cracks radiating from the footing are a giveaway that the soil expanded and pushed.

  • Base rot: Wood is soft, discolored, or crumbling within 6 inches of the soil line. Fingers or a screwdriver sink in easily.
  • Soil heave: Footing appears intact but tilted. Soil may be cracked or mounded on one side.
  • Footing failure: Concrete is cracked, separated from the post, or sitting proud of the surrounding soil.
  • Installation depth issue: Post is only 18-24 inches deep, common on builder-grade fences, and never had a chance.

Once you know which failure mode you’re looking at, the repair path becomes clear. A reset is a half-day job on one post. Footing replacement is a post-and-concrete job. Systemic soil or installation issues may mean the whole run gets rebuilt. For a broader look at what a proper fence installation includes in Burbank, see our Fence Installation in Burbank page.

Why Concrete Alone Fails: Post Depth and Footing Mix

Two installation decisions determine whether a fence lasts 10 years or 30: how deep the post goes and how the footing is built. Most failures we diagnose in Burbank come down to one of these.

Post depth first. The rule of thumb is one-third of the post above grade buried below grade – so a 6-foot fence means at least 2 feet below grade, and in areas with expansive clay soil closer to 30 inches. Builder-grade fences often go 18 inches, which is why they tilt within a decade. If your post is planted shallow, no repair short of a new footing will actually fix it.

Footing mix second – and this is where the counterintuitive part comes in. A post set in pure concrete, with the post bottom touching the concrete directly, traps moisture against the wood at grade. That moisture has nowhere to go, so rot starts right at the base of the post. The fix is a foot of gravel at the bottom of the hole below the concrete, which gives water somewhere to drain away from the post bottom. Combined with a slight crown on the concrete at the top, this is the difference between a post that lasts 25 years and one that lasts 12.

  1. Dig the hole to the local frost line or 30 inches minimum in Burbank’s clay soils.
  2. Add 6-12 inches of gravel at the bottom for drainage.
  3. Set the post so the wood doesn’t touch the bare soil base.
  4. Pour concrete with a slight slope away from the post so water sheds.
  5. Leave a 1-2 inch gap between concrete and the finish grade so water doesn’t pool against the post.

If you’re rebuilding a run, this is the single most important thing to get right. The material and the design get all the attention, but the footing is what you notice five years later when the neighbor’s fence is still straight and yours isn’t. We build footings to these specs on every project we manage, which is part of what the 730-Day Done Right Promise actually covers.

Reset or Replace? Testing Post Integrity Without Digging It Up

You can usually tell whether a post can be reset or needs full replacement in about five minutes with two hands and a screwdriver. Here’s the diagnostic we use.

First, the push test. Put one hand at shoulder height on the post and push it firmly toward the fence line. If the post moves as a unit – top and bottom together, rotating around the footing – and the surrounding ground cracks, the post itself is likely solid but the footing failed. That’s a reset candidate. If the post flexes at the base while the ground stays put, the wood is compromised and the post needs replacement.

Second, the probe test. Use a screwdriver or awl and poke the post at four points around the base, right where it enters the soil. Pressure on the tool tells you everything. Firm wood means you’re clear. Spongy or crumbling wood means rot. If rot is less than an inch deep around the perimeter, a post sleeve or wood hardener plus a surface repair can buy you time. If rot goes deeper on one side, the structural capacity is gone – replace the post.

Third, look at the fence line above. A single leaning post with intact panels above it is often a reset. A leaning post plus sagging rails plus racked panels means the whole section has shifted and the repair grows.

  • Reset candidate: Post is solid, footing has failed, one or two posts involved, panels intact.
  • Reset with new footing: Post is solid but footing was shallow or cracked. Plan for concrete work.
  • Replace post, keep panels: Post is rotted at base but panels and rails are in good shape.
  • Replace section: Multiple posts failing together, or post plus rails plus pickets all compromised.
  • Rebuild the run: Footnotes are shallow across the whole fence, or the run uses a footing design that will keep failing.

Costs land roughly in this order: a reset is a couple hundred dollars, a post replacement with new footing runs a few hundred, and a section rebuild gets into four figures. We see customers pay for the cheap fix twice before calling us, which is why upfront diagnosis matters.

Why Fence Boards Warp, Cup, and Split

Fence boards warp, cup, and split at different rates depending on wood grade, moisture content at installation, and how the boards are oriented. Understanding that helps you sort problems you can correct from problems that mean replacement.

The three failure patterns look different. Cupping is when the board edges lift toward you while the center stays put, making a shallow “U” shape. That’s caused by one face drying faster than the other. Bowing is a lengthwise curve, usually from uneven drying or from the board being cut from a juvenile tree. Checking and splitting runs along the grain and starts at the ends. Small checks are cosmetic. Splits that run through the board or follow a fastener line mean that board is done.

Wood grade matters more than most homeowners realize. Box-store “fence grade” cedar and pine can have 20% or more of the boards warp within a year. We specify higher grades with fewer knots for the top rails and pickets because that’s where cupping shows worst. In Burbank’s dry summer heat, the moisture swings are extreme – boards that were barely dry at the lumber yard will move a lot in their first summer.

Direction of installation matters too. Boards installed heart-side out (the tight growth-ring side facing the viewer) cup less than flat-sawn boards installed flat-side out. In our experience across Burbank installs, boards installed flat-side out cup within two seasons. Boards installed heart-side out often hold their shape for a decade.

What can be corrected: minor cupping by re-securing or replacing the backer rails, and small checks by sealing the board ends. What requires replacement: split boards, heavily cupped boards that bow between rails, boards with rot at the bottom where they meet the rail or grade. Do an annual check in Burbank each spring – pull one picket from each run, look at the bottom edge, and decide based on what you see.

Gate Sag: Hinge Failure vs. Post Movement vs. Frame Racking

Gate sag has three root causes that look almost identical from the driveway but need three different fixes. Getting this wrong is why people adjust the same hinge three times and it keeps dragging.

Hinge failure is the easy one. If the gate panel itself is square (check both diagonals – they should measure equal) and the post is plumb and firm, then the hinges are the problem. Worn hinge pins, stripped screws, or a hinge installed with short screws in soft wood will cause a sag that appears only in the last 6 inches of swing. The fix is proper screws, longer fasteners, or heavier hinges rated for the gate’s weight. The repair holds if the post is solid.

Post movement is the common one, and it’s the one people miss. Push the gate post side to side. If the top of the post moves more than a half inch with moderate hand pressure, the post is the source of the sag and adjusting hinges will only buy a few months. This is a footing or base rot issue – same diagnosis as a leaning fence post. The gate can’t close properly because the post is out of plumb, and the hinges are doing their best to compensate.

Frame racking is the structural one. If the gate panel measures rectangular but the diagonals are unequal – say 1/2 inch or more – the gate frame itself has lost square. This usually traces back to a gate that was built without a diagonal brace, or a brace that’s pulled loose. A braced gate holds its shape; an unbraced or underbuilt one racks within a season or two.

  • Test 1: Measure both diagonals of the gate panel. Unequal means racking.
  • Test 2: Push the gate post side to side. Movement means post issue.
  • Test 3: Swing the gate slowly. A hinge problem shows as a sag that increases with swing angle.
  • Test 4: Look at hinge screws. Short screws or stripped holes point to hinge failure.

Hinge fixes hold. Post fixes hold if the footing is corrected. Frame racking fixes hold only if a diagonal brace is added or the gate is rebuilt with a proper frame. Anything else is temporary, and we’ve seen gates that were “fixed” three times that still drag.

Burbank Climate and Soil: What Makes Fence Problems Worse Here

Burbank sits on some of the most active clay soil in the San Fernando Valley, and the climate swings that come with it are the reason fences here fail in patterns you won’t see in coastal areas. If you’re troubleshooting a fence in Burbank, the soil is usually part of the story.

Clay soils expand when wet and shrink when dry. That movement pushes on footings from the sides, which is why we see posts tilt after a wet winter even if the footing was installed correctly. It’s also why “just push it back” almost never works – the soil will do the same thing next season. Footings in Burbank need to be deeper than what a coastal installer might do, and drainage away from the fence line matters more than it does elsewhere.

The dry summer heat is the other half. In Burbank, a fence that gets full sun from noon to sunset will see the wood on the sunny side dry and shrink while the shaded side stays stable. That’s why cupping is often worse on south and west-facing fence runs near neighborhoods like Rancho Equestrian or Magnolia Park. A sealed finish every couple of years helps, but board grade and installation direction are what really control it.

Watch for dry rot at the base of posts on the north and east sides of a property – less sun, more moisture held in the soil, faster rot. It’s the opposite problem from the sun-facing runs, and the fix is the same: proper drainage at the footing, not just replacing the post above it. If your fence is on a slope, drainage can be a bigger job than the fence itself. For neighbors with a long driveway or sloped lot, the grading done alongside Driveway & Pavers in Burbank projects often ties directly into fence drainage.

DIY Scope vs. Systemic Installation Failure

Some fence problems are a Saturday afternoon. Others look small but point to a decision made at installation, and every DIY attempt to fix the symptom makes the underlying problem more expensive. Here’s how to tell which you’re in.

Genuinely DIY-scope problems:

  • Replacing one damaged picket or board.
  • Re-tightening or replacing gate hinges on a post that’s plumb and firm.
  • Sealing board ends and reapplying a finish.
  • Replacing one split rail or a broken bracket.
  • Minor cupping correction by adding a backer rail.

These fixes are within reach for most homeowners, and they hold because the underlying structure is sound.

Problems that need professional involvement:

  • A post that moves at the base with hand pressure – footing or rot is the issue.
  • Any gate that sags because the post moves. Hinge adjustments will not fix this.
  • Three or more posts failing within a few years of installation. That’s a systemic depth or footing mix issue.
  • Boards that are cupping across an entire run. Grade and installation direction were wrong.
  • Any fence problem that touches buried utilities, property lines, or has movement near a retaining wall.
  • Fence posts set through driveway pavers, patios, or pool decking.

The line is structural. If the wood itself at a single post or board is the problem, DIY can work. If the underlying footing, depth, or drainage is the problem, you’re not fixing a fence – you’re fixing the installation. That’s a different job. If you’re planning a larger build that involves a fence alongside structural work, our Home Additions & ADU in Burbank team handles fence integration as part of the same project.

Common Mistakes to Avoid

  • Setting posts in pure concrete without drainage. Water sits against the wood and rot starts at grade. Add gravel at the bottom of every hole.
  • Digging 18-inch footings because “that’s what the old fence had.” It also failed within 10 years. Burbank clay soils need deeper footings than that.
  • Adjusting gate hinges without checking the post. If the post moves, hinge fixes are cosmetic. You’ll be back in three months.
  • Buying fence-grade boards at the lowest price. In Burbank’s dry heat, cheap boards cup and split within two summers. Grade matters more than the material name.
  • Installing boards flat-side out. Boards cup toward the viewer within a couple of seasons. Heart-side out is the cheap fix at installation.
  • Skipping a diagonal brace on the gate. An unbraced gate racks within a season. The brace is what holds the frame square.
  • Ignoring slope and drainage on the property. A fence that sits in a low spot gets rotted posts even with good footing work. Fix drainage with the fence, not after it.

When to Call a Professional

Call a professional when the fence problem is structural rather than cosmetic – a post that moves at the base, a gate sag driven by post movement, three or more posts failing within a few years, or visible footing cracks across a run. These point to installation decisions that a board-level fix can’t correct, and diagnosing them properly saves you from paying for the same repair twice.

Also call if the fence runs near a property line, buried utilities, retaining walls, or paved surfaces – that’s where a small repair goes sideways fast. Groundwork Construction Co. of Burbank offers free estimates in Burbank – call (844) 797-7958. A live person answers around the clock, and the estimate includes a written diagnosis of what’s actually failing, not just a quote to replace boards.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Frequently Asked Questions

A new white vinyl privacy fence with a double gate

How to Prevent Fence Problems on the Next Installation

Every problem in this guide traces back to an installation decision, which means most fence failures are preventable at the build stage. When you’re replacing a fence or building new, insist on these from whoever does the work:

  1. Post depth of 30 inches minimum in Burbank’s clay soils, deeper if the run is on a slope.
  2. Gravel at the bottom of every hole for drainage, above the post base.
  3. Crowned concrete at the top of each footing so water sheds away from the post.
  4. Heart-side-out board orientation for pickets, especially on south and west runs.
  5. Diagonal bracing on every gate frame, sized for the gate’s weight.
  6. Higher-grade lumber for rails, pickets, and gate frames – no fence grade above the middle rail.
  7. Drainage addressed at the fence line, not just at the property edge.

We specify premium brands for the parts of a fence that take the most stress – Schlueter post bases for water management at the bottom, Grohe gate hardware for smoother operation – because those are the components that fail first when corners are cut. Built to last, backed in writing, starts with getting the footing right. To see how we approach full property scope on the same visit, visit our Groundwork Construction Co. of Burbank home page, or explore our Fence Installation in Burbank service page for the specifics on what a properly installed fence looks like.

The Bottom Line

Most fence failures trace back to post depth and footing mix, not the material or the design. When you’re troubleshooting a leaning post, a sagging gate, or warping boards, work backward from the symptom to the installation decision that caused it. Real fixes address the footing and drainage; cosmetic fixes buy you a season or two at best. In Burbank specifically, clay soil and dry summer heat put extra pressure on both, so proper depth, gravel drainage, and heart-side-out board orientation aren’t optional. Get those right at the next installation and you’ll skip most of the problems in this guide.

Get a Free Fence Estimate in Burbank

A new multi-panel patio door opening a kitchen to the patio

Groundwork Construction Co. of Burbank is the full-scope home construction partner for homeowners who refuse to gamble on their biggest investment. Fence installation sits alongside our Driveway & Pavers, Home Additions & ADU, roofing, windows, and remodeling services, backed by a curated portfolio of top-tier material brands and a 730-Day Done Right Promise on every project. Our technicians have up to 12 years of experience, they’re background-checked and uniformed on every job, and every estimate is written with line-item pricing and no change orders. Calls are answered by a live person 24/7, and we offer 0% financing for 18 months plus $1,000 off projects over $10,000. Call (844) 797-7958 to schedule your free estimate.

Written by the team at Groundwork Construction Co. of Burbank.

Getting started with Groundwork in Burbank

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Burbank team

A local vetted partner works across Burbank and the towns around it, to the same written standard as every Groundwork job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Burbank? Licensed & insured · free written estimates
Call (844) 797-7958
Local Service Coverage

Request a Free Estimate in Burbank

Tell us what you need - Groundwork Construction Co. of Burbank responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch