A Groundwork company - serving Burbank, CA
A new herringbone paver driveway

Brick Paver Driveway in Burbank, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Burbank
A new paver patio with a seat wall and fire pit
A new paver pool deck
A new wood side gate with black hardware
A stone counter, tile backsplash and open shelf after a kitchen remodel
A remodeled hall bathroom with subway tile and a floating vanity
A garage converted into a guest room and home office
New architectural shingles with a clean valley
A new casement window over a kitchen sink
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Brick Paver Driveway in Burbank, CA

A brick paver driveway in Burbank typically costs between $14 and $28 per square foot installed, with most residential driveways landing in the $9,000 to $24,000 range depending on size, pattern, and base prep. Brick pavers are a genuine upgrade over poured concrete or asphalt: they handle heat, they drain, they flex instead of cracking, and individual units can be lifted and reset when a tree root shifts the grade. If you’ve driven past a 1920s bungalow on Alameda or a hillside home up in the Verdugo foothills and wondered how those driveways still look sharp, the answer is usually interlocking brick set on a properly built base.

We handle the full scope at Groundwork Construction Co. of Burbank, from demolition of the old slab to final sand-sweep. Our technicians have up to 12 years of experience on paver work, and every job carries the 730-Day Done Right Promise – if anything settles, heaves, or shifts within that window, we make it right. Call (844) 797-7958 and a live person picks up, day or night.

This page covers the brick paver piece specifically. For the full range of hardscape options we install, see our Driveway & Pavers in Burbank page.

Key takeaways

  • Most brick paver driveways in Burbank run $14 – $28 per square foot installed.
  • Base prep is 60% of the job – our Burbank soil and summer heat make it the deciding factor in whether pavers stay flat.
  • Permits are often required for driveway widening or changes to the public right-of-way; we walk you through the Burbank process.
  • 730-Day Done Right Promise on all workmanship; upfront pricing before we start.
  • Call (844) 797-7958 for a free estimate and design consult.
A crew setting pavers over a compacted base

When You Need a Brick Paver Driveway

Burbank homeowners call us about pavers for a handful of consistent reasons. Here’s what we actually hear on the phone:

  • Your concrete driveway has cracked or settled. Burbank’s clay-heavy soil expands and contracts through the dry summer and the winter rains, and poured slabs often crack right down the middle within 15 to 20 years. If you’ve got a crack running from the street to the garage, pavers are worth a look because they flex without failing.
  • You want curb appeal that survives resale scrutiny. The Rancho Equestrian and Magnolia Park neighborhoods draw buyers who notice hardscape. A brick paver driveway reads as an upgrade, not a repair, and it photographs well on listing pages.
  • You’re widening the driveway or adding a turnaround. Anyone who’s tried to back out onto a busy Glenoaks cross street knows the pain. Widening a driveway means new base, new grading, and usually a permit – pavers make the transition clean and let you match the existing look.
  • Drainage is pooling water against the garage or foundation. Our hillside lots and any driveway with a shallow grade are prone to standing water after the first big rain. A paver system with proper slope and a permeable base moves water away from the structure.
  • You’re tired of patching asphalt every few years. Asphalt in Burbank’s summer heat softens underfoot and cracks within a season or two. Brick pavers hold their shape through the worst of August.
  • You’re remodeling and want the driveway to match a new entry or porch. If a driveway replacement is part of a larger exterior project, brick pavers tie the front elevation together in a way that stamped concrete never quite manages.

Our Brick Paver Driveway Process

We run every brick paver job through the same six-step sequence. It’s not glamorous, but it’s why our installs stay flat and tight instead of wandering after the first hot summer.

  1. Site walk and layout. We measure the existing driveway, check the slope and drainage direction, and confirm where the pavers will tie into the garage apron, sidewalk, and street. If a permit is needed for a widening or right-of-way change, we identify that before any material is ordered.
  2. Demolition and haul-off. We break out and remove the old concrete or asphalt, then haul the debris away. This usually happens in a single day for a standard two-car driveway.
  3. Base excavation and compaction. We dig down to a proper subgrade depth, bring in Class II base rock in lifts, and compact each lift with a plate compactor. In Burbank this step matters more than anywhere – the clay soil under half the city needs a stable, well-compacted base or the pavers will telegraph movement within a year.
  4. Setting bed, edge restraint, and pavers. We lay a screeded sand setting bed, install an edge restraint along the open sides to keep the pattern locked, and set the brick pavers in the layout you’ve chosen – running bond, herringbone, basketweave, or a border pattern.
  5. Cutting and sand-sweep. We cut the perimeter units with a wet saw for clean edges, then sweep polymeric sand into the joints and compact the surface. Polymeric sand locks the pavers and blocks weeds and ant trails.
  6. Final walkthrough. We walk the finished driveway with you, confirm the pattern and grade, and hand over care instructions. Most standard brick paver driveways complete in three to five working days.

We keep material selections curated rather than endless. For hardscape color and texture we work with Belgard, and where a driveway project ties into a shed, garage addition, or ADU pad, James Hardie siding and trim keep the whole structure coordinated. The same design discipline we bring to a brick paver driveway is what we bring to a kitchen – the color decisions hold together.

New double-hung windows in a dining room

Brick Paver Driveway Pricing in Burbank

Brick paver driveway installation in Burbank runs $14 to $28 per square foot installed for a standard residential job. A typical two-car driveway of 400 to 600 square feet usually lands between $9,000 and $24,000. Small repairs and resets cost far less – usually $400 to $1,200 – while full rebuilds of large or hillside driveways can push past $30,000.

Here’s a line-item look at what drives the number:

Item Typical range (Burbank, 2026)
Demolition and haul-off of existing concrete/asphalt $1.50 – $3.50 per sq ft
Base excavation and Class II compaction $3.00 – $6.00 per sq ft
Brick pavers, sand setting bed, and edge restraint $8.00 – $16.00 per sq ft
Polymeric sand and final compaction $1.00 – $2.00 per sq ft
Permit and inspection fees (where required) $150 – $600
Drainage correction or catch basin $400 – $2,500

The biggest variable is base prep. A driveway over firm, well-graded soil is cheaper to build than one over the clay pockets we routinely find in the Burbank flats near the airport. Pattern matters too: herringbone takes longer to set and uses a bit more material waste than a simple running bond, though it locks tighter and handles heavy vehicles better. Hillside lots off the Verdugo hillsides or near Stough Canyon need retaining edge work and heavier restraint, which adds cost but prevents long-term failure.

We give you a written upfront price before any work starts. The number you see is the number you pay. For larger projects we also offer $1,000 off jobs over $10,000 and 0% financing for 18 months, so a full driveway replacement doesn’t have to blow the budget in one hit. Call (844) 797-7958 for a free estimate and design consult.

What about drainage and Burbank permits?

Burbank requires a permit for most driveway construction that touches the public right-of-way, changes the curb cut, or widens the approach to the street. Interior property work is often exempt, but we confirm with the city before scheduling so there are no surprises. On the drainage side, we grade the driveway so water runs away from the garage and foundation – critical on our clay-heavy lots where water would otherwise sit and undermine the base. If a simple slope isn’t enough, we can add a catch basin or a running channel along the low edge.

FAQs – Brick Paver Driveway

How much does a brick paver driveway cost in Burbank?

A brick paver driveway in Burbank costs $14 to $28 per square foot installed, so a standard 400- to 600-square-foot driveway runs $9,000 to $24,000. Base prep, pattern complexity, drainage work, and permit fees are the main cost drivers. Repairing or resetting a few settled pavers is much cheaper, usually $400 to $1,200. Call (844) 797-7958 for a free estimate – a live person answers around the clock.

Can brick pavers handle Burbank’s heat and clay soil?

Yes, provided the base is built correctly. Brick pavers flex rather than crack when the clay-heavy soil under Burbank expands and contracts, and they reflect heat better than asphalt. The failure we see most often in Burbank is pavers laid over an under-compacted base, which ripples or settles within a year – the fix is proper excavation, Class II base rock, and compaction in lifts. We do that work on every job, and our 730-Day Done Right Promise covers anything that shifts after install.

How long does a brick paver driveway take to install?

Most residential brick paver driveways complete in three to five working days from demo to final walkthrough. Smaller jobs or repairs can wrap in a day or two. Larger driveways or hillside lots with significant base prep take longer – we schedule the timeline at the free estimate so you know exactly what to expect. Call (844) 797-7958 to lock in a date.

Is it cheaper to repair or replace a concrete driveway with pavers?

Repairing individual pavers is far cheaper than a full replacement, and it’s one reason pavers hold up over time: you fix a small section, not the whole slab. Full replacement with brick pavers costs $14 to $28 per square foot installed, versus $8 to $14 for a new concrete pour, but pavers typically last 25 to 40 years with repair instead of replacement. We walk you through the trade-off honestly during the estimate. Call (844) 797-7958 to talk it through.

Do you offer a warranty on brick paver driveways?

Yes. Every brick paver driveway we install is covered by our 730-Day Done Right Promise – one of the longest workmanship guarantees in the residential construction space. If anything settles, heaves, or shifts within that window, we make it right. Material warranties stack on top; ask us about the specific pavers we’re recommending for your job. Call (844) 797-7958 to discuss.

Our driveway and hardscape work is part of a broader home improvement offering. Here are the adjacent pages Burbank homeowners most often visit next:

Ready to talk brick pavers for your Burbank driveway?

Groundwork Construction Co. of Burbank handles brick paver driveways from demo to final walkthrough, with upfront pricing, background-checked technicians in uniform, and the 730-Day Done Right Promise standing behind the work. Our technicians have up to 12 years of experience on paver installs, and every estimate is free. Call (844) 797-7958 today – a live person answers around the clock.

Written by the team at Groundwork Construction Co. of Burbank, serving Burbank.

Getting started with Groundwork in Burbank

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Burbank team

A local vetted partner works across Burbank and the towns around it, to the same written standard as every Groundwork job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Burbank? Licensed & insured · free written estimates
Call (844) 797-7958
Local Service Coverage

Request a Free Estimate in Burbank

Tell us what you need - Groundwork Construction Co. of Burbank responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch