







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Glendale, CA: What You’re Actually Buying
A chain link fence in Glendale runs $3,500 to $9,000 for a typical residential lot, and most yards are measured, set and finished in two to four working days. You’re buying galvanized or vinyl-coated mesh stretched on posts set in concrete, with a tension wire, top rail and at least one gate. For acreage parcels and steep foothill lots the number climbs, because post spacing and bracing have to account for grade and wind. Call (844) 797-7958 and we’ll walk your property line and put a written, line-item price in front of you at no charge.
How a Chain Link Fence Actually Goes In, Day by Day

Chain link moves fast compared to masonry or wood, but the sequence matters more than the speed. Here’s the real order of work on a Glendale job.
Stage 1: Site visit and line layout (day one, about 90 minutes)
We walk the property line with you and confirm where the fence runs, where the gates land, and where the corners fall. You decide the gate widths and swing direction at this stage, because reversing a gate after posts are set means digging them out. On hillside lots we also check grade changes that will need stepped panels.
Stage 2: Utility marking and permit filing (days one to three, depending on the city)
Before anything gets dug we confirm utility locations along the fence line. If the run is over a certain height or sits at a property line, we file with the city and handle the inspection schedule. You don’t have to chase the permit; we do.
Stage 3: Demolition and post setting (day two, most of the day)
Old fence comes out, holes get dug to depth, and posts go in with concrete. On Glendale’s harder, rockier soils in the foothill areas, hole digging takes longer than a flat-valley job. Posts cure overnight before any tension goes on.
Stage 4: Rails, mesh and tensioning (day three)
Top rail, tension wire, mesh and gates go up. This is where the fence either feels solid or feels loose, and it comes down to tension. You’ll walk the run with us before we finish.
Stage 5: Final walkthrough and cleanup
We check every gate latch, pull test the mesh, haul off debris and old material, and hand you the workmanship coverage in writing. Our 730-Day Done Right Promise applies here: if something isn’t right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Options You’ll Be Choosing Between
- Galvanized vs. vinyl-coated mesh: Bare galvanized is the lowest-cost path and holds up well in dry heat. Vinyl-coated (usually black or green) costs more per linear foot but blends into landscaping and resists scuffing. For a long property edge visible from the street, coated is the better-looking buy.
- Post gauge and diameter: This is the single biggest durability decision. Lighter wall posts feel fine on day one and start leaning after a few Santa Ana wind seasons. Heavier-gauge posts cost more and are the difference between a fence that lasts and one that wavers.
- Height: Standard residential runs sit at typical yard height. Taller runs on acreage or workshop enclosures need heavier posts and more bracing, which is where the price climbs.
- Gate type: Walk gates are simple; drive gates for a detached workshop or RV pad need heavier frames and properly set hinges. Decide gate size before layout, not after.
- Top rail and tension wire: Both keep the mesh from sagging over time. Skipping the tension wire is a common shortcut and it shows within a year.
If the chain link is one piece of a larger project, the wider scope lives on our Fence Installation in Glendale page. You can also compare materials and options on our Fence Installation hub.
What Chain Link Fence Costs in Glendale, CA

Residential chain link in Glendale runs $3,500 to $9,000. That covers materials, posts, concrete, gates and labor for a standard lot. Here’s what pushes a job toward one end or the other:
- Linear footage and corners: Every corner and end post needs extra bracing. A lot with four corners costs more than a straight run of the same length.
- Terrain: Steep grade on a hillside lot means stepped panels and more post work. A flat run is far quicker.
- Soil and digging conditions: Rocky foothill soil slows hole digging and adds labor time.
- Material grade: Heavier post gauge and vinyl coating both add cost. So do drive gates versus walk gates.
- Permit scope: Height and property-line placement can trigger a filing and inspection, which adds a line item to the estimate.
A written estimate from us lists the footage, post spec, gate count and permit status as separate lines. What isn’t included is usually old-fence removal, landscape repair after digging, and any utility relocation. We flag those upfront so nothing surprises you mid-job. No-hassle upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Glendale Homes Specifically Do to This Job
Glendale isn’t flat suburbia, and fencing here reflects that. The city’s housing stock spans 1920s-40s Spanish Colonial and Craftsman bungalows near downtown, 1950s-60s ranch tracts, and contemporary custom builds climbing the hillside streets off Glenoaks and into Chevy Chase Canyon. Those hillside lots are where chain link gets interesting: steep grade means stepped panels and extra bracing, and the same slope-stability concerns that push a simple addition into a geotechnical review also shape how posts get set on a grade. Seismic and hillside grading codes here are among the strictest in the state, so anything near a slope gets a careful look before we dig.
The hot, dry summers and Santa Ana wind events are the other local factor. Wind puts real load on a fence line, which is why post gauge and tensioning matter more here than in a sheltered valley. We cover these ZIPs across the city: 91226, 91205, 91204 and 91208. If you’re adding a workshop or accessory structure, homeowners often pair this with ADU Site Prep & Utilities in Glendale, since the fence line and utility runs get planned together.
Our technicians have up to 12 years of experience, are background-checked, and arrive in uniform on every job.
Serving Glendale, CA – Our Local Coverage Area
We serve Glendale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Glendale

Most residential chain link fences take two to four working days from start to finish. Permit filing can add time depending on the run’s height and placement. Call (844) 797-7958 for a timeline on your specific property.
Many residential runs don’t require a permit, but height and property-line placement can change that. We confirm the rule for your specific lot and handle any filing that’s required. Call (844) 797-7958 and we’ll tell you what applies to your address.
Expect $3,500 to $9,000 for a standard residential lot. Footage, terrain, post gauge and gates move that number. Call (844) 797-7958 for a free written estimate with line items.
It will if the post gauge and bracing are right for the wind exposure. That’s why we don’t shortcut tension wire or corner bracing on hillside runs. Call (844) 797-7958 to talk through the spec for your property.
Every job is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction. Call (844) 797-7958 with questions about coverage.
Get a Free Chain Link Fence Estimate in Glendale
Fencing often gets planned alongside other work, and homeowners frequently pair a chain link run with Door Installation in Glendale for a workshop or outbuilding. Wherever you’re starting, we serve the whole of Glendale and the surrounding area. Call (844) 797-7958 to schedule your free on-site estimate. A live person answers around the clock, we walk your line, and you get a written, line-item price with no surprises. We’ll also walk you through 0% financing for 18 months and $1,000 off projects over $10,000 if it fits your job.
Written by the team at Groundwork Construction Co.












