







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Burbank, CA: What It Takes and What It Costs
Most single door installations in Burbank run $650 – $2,900 per door, and a typical interior door swap takes one day from demo to hardware. Entry and exterior door replacements usually land between $1,200 and $4,500 depending on material, security rating, and whether the rough opening has to be rebuilt. That number covers removal, framing adjustments, insulation, trim, finish, and haul-away. Call (844) 797-7958 to schedule a free on-site estimate with a written line-item quote.
How Our Door Installation Process Works, Stage by Stage

We don’t hand you a date and disappear. Here’s exactly what happens between the estimate and the final walkthrough, so you know what you’re deciding and when.
Stage 1: On-Site Measure and Scope (Day 1, about 45 minutes)
A technician measures the rough opening, checks the frame for plumb and square, and photographs any rot, water intrusion, or old shimming before anything gets touched. You get a written line-item quote before you commit. Decide here: door style, material, and whether the existing frame stays or goes.
Stage 2: Permit Check and Ordering (Days 2 – 5)
Interior door swaps don’t require a permit in Burbank. Entry door replacements and any structural change to the opening do. We tell you upfront which category you fall into, pull what’s required, and order your door. Lead time on a stock slab is under a week; a custom Andersen or James Hardie-trimmed entry can run three to five weeks.
Stage 3: Demo and Opening Prep (Day 6 or delivery day, 2 – 3 hours)
The old door comes out, the rough opening gets cleaned and checked for rot, and any failing sill or threshold gets replaced before the new unit goes in. If we find water damage behind the trim on an older Magnolia Park bungalow, you hear about it before we fix it, with a revised price and photos.
Stage 4: Set, Shim, and Seal (Same day, 3 – 4 hours)
The new door gets set, shimmed, squared, and checked for swing and latch alignment. We foam the perimeter, seal the exterior with flashing tape and a proper backer, and hang the hardware. A wrong seal here is what causes callbacks in year two.
Stage 5: Trim, Finish, and Walkthrough (Day 7 – 8, half day)
Casing, threshold, and finish go on. We do a final open-close test, show you the drainage slope on the exterior threshold, and walk the job with you. You sign off when it’s right, and it’s covered under our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Door Options You’ll Choose Between
The door itself is the biggest variable on your bill. Here’s the honest trade-off of each choice before you commit.
- Solid wood (oak, mahogany, knotty alder): Beautiful, warm, and heavy enough for real security on an entry. Costs $1,800 – $3,500 for a good entry slab. It moves with heat and humidity, so it needs a finish every few years in Burbank’s dry summers. Best for a custom entry you plan to keep.
- Fiberglass entry doors: $1,200 – $2,600 installed. Holds up to the Valley heat better than wood, won’t warp or crack, and can be finished to look like wood. This is what we recommend for west-facing Burbank entries that take afternoon sun.
- Steel entry doors: $900 – $2,200 installed. Strongest on a budget, and the right call for security-focused openers on alley-facing or townhome entries. It dents, and it needs paint to stay rust-free.
- Hollow-core interior doors: $300 – $650 installed. Fine for closets and bedrooms. It won’t stop noise or force.
- Solid-core interior doors: $550 – $1,100 installed. Noticeably quieter and heavier. Worth it in a hallway that opens onto an office or master suite.
- Hardware and locking: $80 – $400. Rolling-code keypad locks and smart deadbolts are the growing request on Burbank entries. A good lock costs less than a break-in claim and lets you change the code without rekeying.
We outfit doors with trusted brand hardware where it matters – Andersen for entry systems, James Hardie trim on exposed exteriors – so the finish you see on day one is still there in year ten.
What Door Installation Costs in Burbank, CA

Here’s the honest Burbank range on a per-door basis, and the variables that push a project to the low or high end.
- Interior door replacement: $300 – $1,100 per door
- Entry door replacement (fiberglass or steel): $900 – $2,600 installed
- Solid wood custom entry: $1,800 – $3,500 installed
- Frame and rough-opening rebuild: $400 – $1,400 add-on
- Permit (entry or structural changes): $150 – $500
What moves the number: door material (hollow-core to solid wood spans 5x), whether the frame is salvageable, if the opening needs to be reframed, security hardware tier, and whether the job lands on a single door or a whole-house set of six.
What’s included in our written estimate: demo, disposal, new door, hardware install, trim, seal, and walkthrough. What’s not: custom finishes if you go beyond factory standard, siding repairs revealed behind a rotted threshold, or a lock system you haven’t picked yet.
See the difference
Before
After
Before
After
Before
AfterWhat Burbank Homes Specifically Do to This Job
Burbank’s door work runs into problems most neighboring cities don’t. The city’s building-safety enforcement is stricter than Glendale or La Cañada Flintridge on unpermitted changes, and the older housing stock hides surprises. Magnolia Park’s 1920s – 40s Spanish Revival and Craftsman bungalows often have original lath-and-plaster frames that are out of square, and settled thresholds that let water in during the occasional winter rain. We see the same thing in the Rancho Equestrian district, where converted garages and unpermitted additions surface the moment a permit pulls the original walls open. In the post-war flats near downtown and the hillside ranch homes, door openings are typically tighter and the original doors thinner, so a solid-core upgrade can mean shimming the frame. All of this is why we measure twice and photograph the opening before we quote. If your door install is part of a bigger Windows & Doors in Burbank project, the scope needs to be sequenced so the door and window work share a single permit where possible.
Serving Burbank, CA – Our Local Coverage Area
We serve Burbank and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Door Installation in Burbank

A single interior door is a one-day job. An entry door takes one to two days once the door is delivered, and the lead time before that runs one to five weeks depending on material and whether it’s custom. Call (844) 797-7958 for an exact timeline based on your door.
Interior door swaps don’t require a permit. Entry door replacements and any structural change to the opening do, and Burbank’s building-safety enforcement is stricter than neighboring cities on unpermitted work. We tell you upfront which category you’re in and pull the permit if it’s required.
Usually yes. A same-size replacement in an existing opening doesn’t touch plumbing or framing. If the new door is wider or taller, we check for utilities and structural members in the path first, and if anything has to move, you see it in the written quote before demo starts.
Interior doors run $300 – $1,100 per door, and entry doors run $900 – $3,500 installed depending on material and hardware. Call (844) 797-7958 for an exact quote – estimates are free and the quote is line-item.
Every door installation we do is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right for two full years. That covers labor and finish issues; manufacturer warranties cover the door slab itself. Call (844) 797-7958 for details on your specific project.
Homeowners in Burbank often pair a door upgrade with Cabinets & Countertops in Burbank, and we handle that under the same project umbrella through our Windows & Doors service. We also cover Burbank for Garage Conversion ADU in Burbank if your door work is part of a larger scope change.
Schedule Your Free Door Installation Estimate in Burbank
Call (844) 797-7958 for a free on-site estimate. You’ll get a written line-item quote, a clear timeline, and a technician who photographs the opening before quoting. A live person answers 24/7 – no voicemail. Estimates and design consults are free, and projects over $10,000 qualify for $1,000 off plus 0% financing for 18 months.
Written by the team at Groundwork Construction Co.












